YoursTrulyHandmade

In an ideal situation, you should wash your windows at least twice a year but this is one of those tasks which most people overlook. One of the reasons behind window washing being such a chore is that the homeowners insist on doing it with paper towels, tons of elbow grease or spray cleaner. Remember that all this rubbing is not at all a good idea and this means moving the dirt from one place to another and putting a charge on the glass which attracts both dirt and dust. Just as you finish with this, the window yet again looks dirty.

You could always seek the assistance of professional window and glass cleaners similar to a Window Cleaning Denver company like Sonlight Window Cleaning, but if you have the right approach and equipment, you might be able to do it yourself too! Although the techniques and strategies aren’t complicated, yet you need to know some of the steps that are involved. Here are some steps to take.

1. Wash with a strip applicator: Picture windows usually demand larger tools. If you use a strip applicator, the long cloth head usually soaks a lot of soapy water and knocks off dirt without scratching the glass. For preparing the cleaning solution, experts usually use a squirt of dishwashing liquid within warm bucket of water. The lesser the suds, the better it can wash.
2. Wipe off clean with a squeegee: Start from the top left of the window and pull off the squeegee from the soapy window pane in the pattern of a reverse S. The left-handers would usually start from the top right. When you finish each stroke, wipe the blade of the squeegee clean with a lint-free rag. Old linen napkins and cloth diapers will be perfect for such tasks.
3. Dry off the remaining drips: Remove water that you see on the remaining edges of the glass with a damp, wet chamois which immediately soaks the wetness without leaving any kind of streaks. Dry off the windowsill with a rag so that they don’t become dirty again while they’re wet.
4. Personalize the squeegee: In order to clean a divided-light window, you will require a squeegee which fits the panes of the window. You can use a hacksaw to cut a squeegee to the actual size. You can trim down the metal channel by 1/4^th inch narrower than the pane of the window and then you can file the cut edges smooth. Also cut the rubber blade to the full width of the window pane and make it fit into the channel so that it can project 1/8^th inch at each end.
5. Scrub off the panes: How about using a hog-bristle brush which works best on the multi-pane windows? Natural sponges are perhaps the best option for cleaning windows like a pro. The natural sponges are more absorbent than the synthetics. Use the same solution of a liquid soap in water and rub each pane from left to right and from top to bottom.

So, if you’re worried about window washing for Sydney home, you can take into account the above mentioned steps. If needed, you can even seek help of a professional.